Sanforization Page 53

We are happy to assist you

Mission and Vision

Looking for the best opportunities to satisfy the customer:

Info

Mobile Phone: +393319020189

Timetables

Working hours: 09.30 / 12.30 - 16.00 / 18.00 From Monday to Friday.

Purpose of processing

The Sanfor treatment aims at the controlled compressive shrinkage of cotton and blended fabrics with other natural or artificial cellulosic vegetable fibers, to obtain dimensional stability.
in both directions (warp and weft), to a suitable extent to guarantee it in the ready-made garments that
will be subjected to repeated washing.
For other compositions there is no permanent shrinkage but only a hand effect.

Processing technology

The fabric passes:
by a small branch, which regulates the height of the fabric in the weft direction;
by a steam humidifier and a heated drum, which evenly humidify the fabric;
through an apparatus made up of a very thick special rubber mat (see figure A, point 2) which runs carried by three tensioning cylinders (fig. A, 3), controlled by the respective tension regulators (fig. A, points 4 and 5) ).
The moistened fabric passes between the carpet and the heated cylinder (fig. A, 1), with an arc of contact that is greater than 180 °.
The desired retraction is proportional to the pressure of the belt and to the speed between the rubber mat and the heated cylinder.

Execution of processing

The operator carries out preventive tests on small samples to establish the possibility of re-entry of the
fabric being worked, then program the speed of the belt to achieve the desired indentation.

Most recurring defects

Excessive retraction of the fabric, which produces the so-called "elephant skin" effect on the fabric.
Folds, which are formed when the fabric passes between the carpet and the cylinder.

Services

After the sale of the machinery we also assist you in logistics and if desired by the customer we have technicians capable of reassembling and starting the machinery.

© 2024 All rights reserved

Project by UsedTextilemachines.eu

en_GBEN

contact me

Fill out the form to contact me